Mishimoto - Performance Air Intake - 13+ Subaru BRZ
Add easy horsepower to your 2013+ BRZ/FR-S with the Mishimoto Subaru BRZ / Scion FR-S Performance Air Intake! We understand that removing the front bumper of your new BRZ/FR-S is not ideal, so our engineers designed this Performance Air Intake to develop a 7 whp / 5 wtq bolt-on power increase with no bumper removal required. In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. This intake uses a silicone induction hose and aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings.
The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16% increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ / FR-S Performance Cold-Air Intake includes a powder-coated airbox to ensure the hot engine bay does not heat soak the air filter. The engineers at Mishimoto designed the airbox to fit properly with the Mishimoto BRZ / FR-S Oil Cooler Kit. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit with a black, blue, or red silicone induction hose. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty.
- Direct fit for the 2013+ Subaru BRZ and Scion FR-S
- Provides 7 whp / 5 wtq gains while maintaining A/F ratios with no additional tuning
- No bumper removal required and installs in under 30 minutes
- Designed to fit with the Mishimoto BRZ / FR-S Oil Cooler Kit and Mishimoto Oil Fill Cap
- Black powder-coated airbox keeps unwanted hot air from entering the air filter
- Wrinkle black aluminum intake pipe includes CNC-machined MAF housing and air straightener
- Fully serviceable oiled air filter provides 16% increase in filter surface area compared to the stock filter
- Improves engine tone
- Smooth design eliminates restrictions and improves airflow
- Available with a black, blue or red silicone induction hose
- Designed in Delaware, USA and filter made in USA
- Mishimoto Lifetime Warranty
- CARB EO #: D-759-3
Pipe Diameter 2.75"
Diversion Plate Material Steel
Airbox Material Aluminum
Oiled Filter 32 g of oil on filter
Pipe Material Mandrel-Bent Aluminum
2013+ Subaru BRZ
2013+ Scion FR-S
Oil Color Red
This kit was designed to fit with the Mishimoto BRZ/GT86 Oil Cooler Kit.
Filter re-oil is not included with the lifetime warranty. Filter requires 32g for re-oiling.
Caution 10 whp & 8 wtq at 6500 RPM
Max Gain 10 whp & 8 wtq at 6500 RPM
(1) Wrinkle Black Aluminium Intake Pipe w/ CNC-Machined MAF
(1) Airbox w/ Protective Edging
(1) High-Flow Oiled Filter
(1) Silicone Induction Hose
(1) Sound Generator Cap
(2) Worm Gear Clamps
Mishimoto Lifetime Warranty
Our team at Bleeding Tarmac is working hard to offer you the best prices and the lowest shipping cost. Because we are offering products at MAP, we unfortunately have to charge shipping fees on some items.
Honesty is the best policy - Let's be honest, shipping is not easy and can be pricy. Here at Bleeding Tarmac, we will not hide shipping cost in sale prices. Our automated check out service provides the best estimate, but don't be shy and contact us to get the lowest shipping quote possible.
If you have specific shipping needs, please contact us before ordering.
Oversized, overweight and/or special items may require additional shipping fees and include, but are not limited to : rollcage kits, batteries, seats, tires and wheels. You will be contacted with the actual shipping charges before your order is processed.
Where do we ship?
We ship to all states located in the continental US.
We do offer shipping to other states or Canada but quotes will be provided on demande only.
Order as early as possible if you want same day shipping.
Order products usually ship within 1-3 business days.
Rally Innovations Rally Light Bars that are in stock will within 3-5 business days. Some products may take longer and we will make sure to contact you if it's the case.
Broken Motorsports products shipping delays vary and we will contact each customer.
To accelerate the shipping process, parts will be shipped from remote warehouses located throughout the United States. Orders may ship in multiple boxes and/or from multiple carriers.
Special orders or out of stock items may take longer and we will inform the customer by email once we have a estimated delay.
Items are carefully packed and sealed to prevent damage in transit. Loss or damage claims must be taken up with the carrier. If a shipment is lost, mis-routed, or damaged we will start an investigation with the shipping carrier. Replacement items cannot be sent until the shipping carrier completes their investigation.
Fluids & Fire Suppression Systems
Shipping restrictions apply to all fluids and fire suppression systems. These items will only be shipped by ground.
ADDED Shipping fees might be required after ordering BRAID WHEELS.
Because of the container shortage and unreliable delays of maritime transport, we only drop ship wheels directly from the manufacture in Spain at the moment.
Shipping fees calculated at check out are ESTIMATED only.
Customer will be contacted after completing the order, BUT before we process payment, to confirm availability, shipping options, and rate.
** Return & Cancellation are usually impossible since most wheels are made to order. Cancellations are ONLY possible if made BEFORE the production begins. Please contact us to verify if anything is possible. **
Unless in stock, order lead time : 4 to 10 weeks
Longer lead times apply during the rebuild season.
Samsonas products are often customized for your car and are shipped from Europe, therefore lead times can vary and occasional delays can occur.
Please order with plenty of time in advance.
Cancellation fee 25%
All Rally Innovations products requires a signature on delivery.
In stock Items will be shipped within 5 business days. Customer will be contacted if shipping delay is expected to be longer.
We reserve the right to charge a 5% cancellation fee for higher dollar orders.
Cancellations may be allowed under certain conditions. Once the order has been packaged and a tracking number has been created a cancellation will not be allowed. Special order items cannot be canceled at anytime once the order is processed.
If you refuse or return your delivery, the buyer will be responsible for the original shipping charges. Exchanged items will be charged shipping fees.
Our team is here to assist you in your purchase. Please take advantage of our knowledge before you order.
Within 30 days from the receipt of you order, certain items can be approved for return if unused, uninstalled, undamaged, and in the original packaging. Items must include all hardware, instructions, tags, or other original included accessories.
All returned items must be approved and issued an RMA number (returned merchandise authorization). No credit will be issued without a RMA number.
Items must be properly packaged for shipping. We reserve the right to charge a restocking fee or decline issuance of credit for damaged retail packaging. Customer is responsible for return shipping fees.
Please use a trackable service for you return such as UPS, FedEx, or certain USPS services. Return shipments should be insured for the proper amount. Bleeding Tarmac will not be held responsible for returns that are lost or damaged in shipping.
Once the item is received and inspected, a credit will be issued. Refunds may take 3-5 business days to post on your account.
All refunds are subject to a processing and/or restocking fee.
No returns on the following: Special order items, any electronic components, helmets, clothing articles, items considered clearance or close-outs, or items with special pricing, are final sale and may not be returned.
Apparel and promotional items
All apparel and promotional items, including hats, t-shirts, sweatshirts, stickers... are final sales. No returns, exchanges, or refunds will be issued on these items.
We offer no warranty above that of the manufacturer of goods sold. In an effort to minimize legalese we offer the following statement. Each brake parts manufacturer warrants it's goods to be fit and free from defects in materials and workmanship. This is quite limiting. Any warranty above and beyond that is strictly on a case by case basis and limited to replacement of equal value only.
Coupon codes can only be redeemed at the time of purchase. Once an order is placed we will not price match any other competitors, all price matching must be negotiated before an order is placed.
We reserve the right to refuse any order for whatever reason, without being liable for any damage or costs.
Most products on our websites are designed for off-road use, and to be used at the purchaser’s own risk and discretion. Bleeding Tarmac, Broken Motorsports, or any of its companies are exempt from any liability, and will be held harmless for any damage incurred, either property damage or personal harm, by the use of any of these products, whether being used for off-road use, or for use on public roads. While some of these products may be legal for use on public roads, Bleeding Tarmac, Broken Motorsports, or any of its companies do not endorse, authorize, or sanction their use on such public roads.